You cannot upload your own rides directly, however, we are more than happy to do this for you. A lot of processing and testing of the ride video and data has to happen before it is suitable for FulGaz.

Your enjoyment of FulGaz will go to a whole new level when you’ve got your own rides in there and we look forward to adding them for you.

We have very high standards, but with a little help, it’s easy to get things to the level our users demand and expect. Make sure you download the guide below and read through it carefully. We are here to help and answer any questions you might have. 

Download the comprehensive guide.

Before filming your entire ride - send us a test!

Before you film your epic ride to send to FulGaz, do a quick ride around the block and take five minutes of footage, send it to us to review and provide feedback on, then we can make sure it's all perfect before you set off on your filming adventure.

• Send the test video and ride data file to: aidan@fulgaz.com

Camera Hardware

We will only accept rides that are filmed using the following cameras...

• GoPro 7 BLACK edition (no other GoPro 7 models)
• Any GoPro 8
• Any GoPro 9
• Pro tip: Invest in a 128gb memory card!

Camera Settings

• Camera Mode: Video
• Resolution: 4K
• FPS: 60
• Hypersmooth: ON
• Audio type: Auto
• Protune: ON (do not adjust - there should be an option to turn it on or off)
• GPS: ON

GPS / Bike Computer

• We prefer data from either a Garmin or Wahoo bike computer
• You also MUST have a speed sensor for distance accuracy when GPS goes off track
• Turn off Autopause (Garmin and Wahoo computers)
• Turn off Smart Recording (Garmin only)
• Send us the original data file - not an export from Strava or Garmin Connect

The only changes to this video are:

• The GoPro 8 and GoPro 9 were released! You may need to take the door off the GoPro *if* you are using an additional battery. We may be able to supply a carbon fibre 3D printed replacement battery door - just ask!
• Turn ON GoPro GPS! While we don’t use the GoPro’s GPS data, it does capture other data that can enhance video stability. We can use this to further refine the quality and accuracy of the ride.

Framing

One of the most common issues we see from video contributors is poor framing. This may include wheels or handlebars creeping into the shot. Below are some great examples of how to frame your shot for the best possible view when uploaded to FulGaz. 

Getting your video content to us:

1. Electronically

Pop the whole ride - raw file straight from the GoPro - onto Google Drive or Dropbox and send us the link and then email the link and your FIT file to: aidan@fulgaz.com

Please include a short description of your ride. If possible please let us know if the ride contains any edits or stops whilst filming and the time points of these.

2. Physically

Take the memory card out, check the files are all good, copy the FIT file from your bike computer onto the card (in the root folder), sticky tape the memory card to a piece of paper and mail it to us!

If including more than one ride, let us know what’s what via a notepad file.

Please include a short description of your ride. If possible please let us know if the ride contains any edits or stops whilst filming and the time points of these.

Thanks!