FulGaz supports a wide range of modern smart trainers, powermeters, smart bikes and other fitness sensors.
While we do our best to offer widespread compatibility, it is impossible for our team to source and test every single model on the market, both past and present, to ensure compatibility. Below is a guide to compatible equipment for FulGaz. To ride on FulGaz with a connected device, your devices will need to broadcast either power or speed over an open Bluetooth Smart or ANT+ signal.
Note: Support for ANT+ is only on Windows. All platforms support Bluetooth.
Smart Trainers and Smart Bikes
FulGaz is compatible with most modern smart trainers on the market. Wahoo, Tacx, JetBlack and many other big brands are all compatible. If your trainer broadcasts an open Bluetooth Smart signal, then it will most likely connect and communicate with FulGaz. Most smart trainers will broadcast power and cadence (and receive trainer control) over one channel.
|Model name||Important information||Calibration app|
|Xplova Noza S||Fully compatible||Xplova Connect APP|
|Pro Xpedo||Fully compatible|
|Drivo II||Fully compatible||UPGRADO App|
|Direto||Fully compatible||UPGRADO App|
|Direto X||Fully compatible||UPGRADO App|
|Direto XR||Fully compatible||UPGRADO App|
|Suito||Fully compatible||UPGRADO App|
|Tuo||Fully compatible||UPGRADO App|
|Zumo||Fully compatible||UPGRADO App|
|Volt & Volt 2||Fully compatible||Jetblack Cycling App|
|Kinetic R1||Fully compatible||Kinetic Fit app|
|Kagura||Fully compatible||Minoura app|
|Oreka O5||Fully compatible||Oreka Training app|
|Saris / CycleOps|
|Hammer||Fully compatible||Saris Utility app|
|H2||Fully compatible||Saris Utility app|
|H3||Fully compatible||Saris Utility app|
|Magnus||Fully compatible||Saris Utility app|
|M2||Fully compatible||Saris Utility app|
|Stages SB20||Fully compatible||Saris Utility app|
|Zero||Fully compatible||Stac zero|
|Flux||Fully compatible||Tacx Utility app|
|Flux S||Fully compatible||Tacx Utility app|
|Flux 2||Fully compatible||Tacx Utility app|
|Neo||Fully compatible||Tacx Utility app|
|Neo Smart Bike||Fully compatible (Neo PLUS not
Real Road Feel compatible yet)
|Tacx Utility app|
|Neo 2T Smart||Fully compatible||Tacx Utility app|
|Vortex||Fully compatible||Tacx Utility app|
|KICKR||Fully compatible||Wahoo Fitness app|
|KICKR CORE||Fully compatible||Wahoo Fitness app|
|Wahoo KICKR BIKE||Fully compatible||Wahoo Fitness app|
|KICKR SNAP||Fully compatible||Wahoo Fitness app|
|KICKR ROLLR||Needs external powermeter||Wahoo Fitness app|
|Wattbike Atom||Fully compatible||Wattbike Hub app|
|Wattbike Atom X||Fully compatible||Wattbike Hub app|
|Zwift Hub||Fully compatible||Zwift App|
|Smart Drive||Fully compatible||Zycle App|
|Pro 3||Fully compatible||Zycle App|
If you have a powermeter on your bike, you can use any trainer you like on FulGaz, either wheel-on or direct drive. Your powermeter will broadcast power data (and possibly cadence) to FulGaz. All modern powermeters that broadcast via Bluetooth Smart should be compatible with FulGaz.
Speed and Cadence sensors
At a minimum, you will need a speed sensor mounted to your rear wheel, a cadence sensor alone is not enough for FulGaz. When using a speed sensor, FulGaz will use this data, along with your chosen "virtual trainer" option, to calculate your on-screen power.
For more information on using a speed sensor, please see this article.
Trainer models that do not work with FulGaz
Unfortunately we are unable to support some smart trainers. Makes and models that are no longer in production should still connect and communicate with FulGaz as long as they meet the requirements listed in the applicable headings above, but future support or updates cannot be guaranteed.
The following models will likely not connect or communicate correctly with FulGaz:
- Earlier Elite trainers, such as the MUIN and B+ models
- Some earlier models of Kinetic trainers
- Most BKOOL trainers and smart bikes
- Renpho AI Smart Bike
- Peloton Bike
- Echelon Bike
- Schwinn 270/570